What Causes Water to Drip From a Commercial Kitchen Exhaust Hood?

Quick answer: Water dripping from a commercial kitchen exhaust hood is usually caused by condensation buildup, grease and moisture mixing inside the ductwork, improperly sloped ducts, a clogged grease filter, or a malfunctioning exhaust fan. Left unaddressed, this dripping can damage equipment, create slip hazards, and violate health code requirements. Identifying the root cause early prevents costly repairs and keeps your kitchen compliant.

Few things disrupt a busy commercial kitchen faster than water dripping from the exhaust hood above your cooking line. It’s distracting, it’s messy, and if left unchecked, it can lead to far bigger problems than a few puddles on the floor.

Exhaust hoods are designed to pull heat, steam, smoke, and grease-laden vapors away from your cooking equipment. When that system isn’t working the way it should, moisture that would normally escape through the ductwork condenses and collects instead, eventually dripping back down onto your prep stations, floors, or food.

This guide breaks down the most common causes of exhaust hood dripping, how to tell which one applies to your kitchen, and what steps you can take to fix the problem before it becomes a safety or compliance issue.

What Does It Mean When Your Exhaust Hood Is Dripping?

A dripping exhaust hood is a sign that moisture, grease, or both are accumulating somewhere in your ventilation system instead of being properly expelled outside. This moisture can originate from cooking vapors, outside air infiltration, or condensation forming on cold surfaces inside the ductwork.

The liquid that drips down is rarely just water. In most cases, it’s a combination of condensed steam and grease residue, which is why it often appears oily, discolored, or has a distinct odor. This combination also makes the drip more hazardous, since grease residue on kitchen floors significantly increases the risk of slip-and-fall accidents.

What Are the Most Common Causes of Water Dripping From an Exhaust Hood?

Several mechanical and maintenance issues can cause your exhaust hood to drip. Here are the most frequent culprits.

Is Condensation Buildup Causing the Drip?

Condensation is one of the most common reasons for hood dripping, especially in kitchens with inconsistent temperature control. As hot, moist air rises from cooking equipment and moves through the exhaust system, it can come into contact with cooler duct surfaces. When this happens, the water vapor in the air condenses into liquid droplets.

This is especially common in kitchens where:

  • The kitchen’s ambient temperature fluctuates significantly between service periods.
  • Ductwork runs through unconditioned spaces, like an attic or exterior wall, where outside temperatures cause rapid cooling.
  • There’s a lack of proper insulation around exhaust ductwork.

Condensation-related dripping tends to worsen during colder months, when the temperature difference between the hot kitchen air and the duct’s exterior surface is greatest.

Could a Clogged or Dirty Grease Filter Be the Problem?

Grease filters are designed to trap airborne grease particles before they enter the ductwork. Over time, these filters accumulate grease buildup, which restricts proper airflow and can cause condensation and grease to pool on the filter’s surface.

When a filter becomes too saturated, instead of grease draining into the designated grease cup or trough, it can drip directly down onto the cooking line below. This is often one of the easiest causes to identify, since dripping tends to occur directly below or near the filters themselves.

Choose regular filter cleaning if you want the simplest, lowest-cost way to prevent hood dripping. Most commercial kitchens should clean grease filters weekly, though high-volume kitchens may need more frequent cleaning.

Is Your Ductwork Improperly Sloped?

Exhaust ductwork should be installed with a slight slope back toward the hood or a designated grease collection point. This slope allows any condensation or grease that collects inside the duct to drain properly rather than pooling in low spots.

When ductwork is installed flat or sloped in the wrong direction, liquid has nowhere to go. It collects at low points within the duct run and eventually leaks out through seams, access panels, or the hood itself.

This is typically an installation issue rather than a maintenance one, meaning it usually requires a professional HVAC or kitchen ventilation specialist to correct.

Could Your Exhaust Fan Be Malfunctioning?

The exhaust fan is responsible for pulling air, steam, and grease vapor out of the kitchen and through the ductwork to the exterior. If the fan is underperforming, whether due to a failing motor, worn belt, or incorrect fan speed settings, airflow slows down significantly.

Reduced airflow means moisture and grease vapor spend more time inside the ductwork instead of being quickly expelled outside. This extended exposure time increases the likelihood of condensation forming and grease settling, both of which contribute to dripping.

Signs your exhaust fan may be the culprit include unusually warm kitchen temperatures, persistent cooking odors lingering longer than normal, and visible grease buildup inside the hood or ductwork.

Is Outside Air Infiltration Contributing to the Issue?

In kitchens with makeup air systems, outside air is introduced to balance the air being exhausted. If this makeup air isn’t properly tempered, meaning it’s too cold or too humid relative to the kitchen environment, it can create ideal conditions for condensation to form within the exhaust system.

This issue is particularly common in commercial kitchens located in regions with significant seasonal temperature or humidity swings.

Could Damaged Seals or Gaskets Be the Source?

Exhaust hoods and ductwork rely on properly fitted seals and gaskets to maintain consistent airflow and prevent leaks. Over time, these seals can degrade due to heat exposure, grease accumulation, or general wear.

When gaskets fail, they can allow air leaks that disrupt the system’s pressure balance, making condensation more likely to form at weak points. Water or grease may then drip from these specific locations rather than evenly across the hood.

How Can You Diagnose the Source of the Drip?

Before calling a professional, there are a few things you can check yourself to narrow down the likely cause.

  1. Note the location of the drip. Dripping directly under the grease filters often points to filter buildup. Drips along duct seams or joints suggest slope or sealing issues.
  2. Check the consistency and color of the liquid. Clear liquid is more likely condensation, while oily or discolored liquid points to grease accumulation.
  3. Review your maintenance schedule. If filters haven’t been cleaned recently, or if your last professional hood cleaning was months ago, that’s a strong starting point.
  4. Monitor when the dripping occurs. If it only happens during or right after heavy cooking periods, condensation from steam is likely. If it persists even when the kitchen is closed, airflow or ductwork issues may be to blame.

When Should You Call a Professional?

Choose professional inspection if the dripping persists after cleaning your filters, or if you notice dripping from the ductwork itself rather than the hood surface. These issues typically indicate underlying installation or equipment problems that require specialized tools and expertise to diagnose safely.

A licensed commercial kitchen ventilation technician can:

  • Inspect ductwork slope and seal integrity.
  • Test exhaust fan performance and airflow rates.
  • Evaluate makeup air system balance.
  • Identify grease buildup inside ductwork that isn’t visible from the hood.

Attempting to access or repair interior ductwork without proper training can be dangerous, particularly given the fire risk associated with grease accumulation inside exhaust systems.

How Can You Prevent Exhaust Hood Dripping Going Forward?

Preventing future dripping comes down to consistent maintenance and ensuring your system was installed correctly in the first place.

  • Clean grease filters on a regular schedule. Depending on your kitchen’s cooking volume, this may mean weekly or even daily cleaning.
  • Schedule professional hood and duct cleaning regularly. Many local fire codes require this at set intervals based on cooking volume and type.
  • Have your exhaust fan serviced periodically. Regular maintenance ensures the motor, belts, and fan speed are all functioning as designed.
  • Insulate exposed ductwork that runs through unconditioned spaces to reduce temperature differentials that cause condensation.
  • Verify makeup air systems are properly calibrated to avoid introducing overly cold or humid air into the kitchen environment.

Keep Your Kitchen Running Safely and Smoothly

A dripping exhaust hood is more than an inconvenience. It’s a signal that something in your ventilation system needs attention, whether that’s a simple filter cleaning or a deeper issue with ductwork installation or fan performance.

Addressing the problem quickly protects your equipment, reduces fire risk, and helps you stay compliant with local health and fire codes. If routine cleaning doesn’t resolve the dripping, don’t wait to bring in a professional. Catching ventilation issues early is always less costly than dealing with the aftermath of a system failure.

Frequently Asked Questions

How much does it cost to fix a dripping exhaust hood?

Costs vary widely depending on the cause. A simple filter cleaning may cost very little if done in-house, while professional duct cleaning, fan repair, or re-sloping ductwork can range from a few hundred to several thousand dollars depending on the extent of the work required.

How often should commercial kitchen exhaust hoods be cleaned?

Cleaning frequency depends on cooking volume and type. High-volume kitchens, especially those doing significant frying or grilling, often need professional cleaning every one to three months, while lower-volume kitchens may only need cleaning every six months. Local fire codes typically set minimum requirements.

Is a dripping exhaust hood a fire hazard?

Yes. Grease buildup within exhaust ductwork is a leading contributor to commercial kitchen fires. Dripping is often a visible sign that grease is accumulating somewhere in the system, making prompt attention important for fire safety.

Can I fix exhaust hood dripping myself?

Simple fixes, like cleaning grease filters, can typically be handled by kitchen staff as part of routine maintenance. However, issues involving ductwork slope, seals, or the exhaust fan itself usually require a licensed professional for safe and effective repair.

Who is responsible for exhaust hood maintenance in a commercial kitchen?

Responsibility often falls on the restaurant or facility owner, though specific maintenance tasks may be delegated to kitchen staff, a facilities manager, or a contracted hood cleaning service. Local fire codes may also specify documentation requirements for maintenance records.

Scroll to Top